The print-ready PDF checklist: KDP, IngramSpark and Lulu side by side
Every print-on-demand service publishes its own list of file rules, in its own words, spread across help pages and a long PDF guide. Most authors read one of them, upload, and find out about the rest from a rejection email. This page puts the rules of the three services most self-publishers use, Amazon KDP, IngramSpark and Lulu, into one checklist you can tick off, with each printer's version of every rule beside it and a link to where it says so. Every rule was read on the printers' own pages and guides on 19 November 2026.
A print-ready PDF in one paragraph
A print-ready book PDF has every page at the exact trim size, or trim plus 0.125 inch of bleed if anything prints to the edge (on three sides for KDP and IngramSpark, all four for Lulu); an inside margin that grows with the page count; every font embedded; pictures at 300 dpi or more at their printed size; colours the printer can reproduce, which for IngramSpark means greyscale or CMYK with no ICC profiles; single pages with no crop marks, ideally exported as PDF/X-1a; and a separate one-piece cover whose spine is sized from the final page count. KDP checks most of this for you; IngramSpark says it prints files as received, so the checking is yours. Tick through the list below, then order a proof.
The 29-point print-ready PDF checklist
Tick each item as you check it. Your ticks are saved in this browser, so you can come back after fixing something. Choose a printer to see only its rules, or leave it on all three to compare.
Page size and layout
-
KDP: 16 standard Amazon.com trims, or custom from 4 to 8.5 in wide and 6 to 11.69 in tall. 6 x 9 in is the default.
IngramSpark: Pick from its trim size list; the setup and the file must match.
Lulu: Pick from its size list; the file must match the size you choose.
-
KDP: With bleed: width + 0.125 in, height + 0.25 in (6 x 9 becomes 6.125 x 9.25).
IngramSpark: With bleed: the same as KDP (6 x 9 becomes 6.125 x 9.25).
Lulu: Bleed on all four sides: 6 x 9 becomes 6.25 x 9.25. A no-bleed file can be sent at trim size and Lulu adds the bleed.
-
KDP: Top, bottom and outside edges. One bleed page means the whole file is set up with bleed.
IngramSpark: Top, bottom and outside only. No bleed on the bind (gutter) edge.
Lulu: All four sides, 0.125 in.
-
KDP: Single pages required; all pages oriented the same way.
IngramSpark: Single-page (1-up) PDF; spreads are not accepted.
Lulu: Single-page layout.
-
KDP: No crop or trim marks, bookmarks, comments or placeholder text.
IngramSpark: No crop, registration or printer marks; they could print.
Lulu: No trim, bleed or margin lines.
Margins
-
KDP: Minimum inside: 0.375 in (24 to 150 pages), 0.5 (151 to 300), 0.625 (301 to 500), 0.75 (501 to 700), 0.875 (701 to 828).
IngramSpark: At least 0.5 in on every side recommended; for colour books it also recommends a 0.125 in white strip at the bind edge.
Lulu: Recommended total inside margin: 0.5 in (under 60 pages), 0.625 (61 to 150), 1 (151 to 400), 1.125 (400 to 600), 1.25 (over 600).
-
KDP: At least 0.25 in without bleed, 0.375 in with bleed.
IngramSpark: At least 0.5 in recommended; printing can vary by 1/16 in.
Lulu: At least a 0.5 in safety margin.
-
KDP: Content must not extend past the margins.
IngramSpark: Headers, footers, page numbers and non-bleed images stay inside the margins.
Lulu: Text, images and page numbers stay inside the safety margin.
Fonts and text
-
KDP: Embedded or Embedded Subset; full embedding recommended.
IngramSpark: All fonts embedded in every PDF; unembedded files are rejected.
Lulu: All fonts embedded (or converted to outlines).
-
KDP: No published rule; Type 3 passes in practice.
IngramSpark: No published rule.
Lulu: No published rule. Some print stores' checkers flag Type 3 as not embedded.
-
KDP: Minimum 7 pt.
IngramSpark: Colour books: text 24 pt or smaller in 100% black only.
Lulu: Solid black prints at 100% with no other colours added.
-
KDP: At least 0.75 pt (0.01 in).
IngramSpark: At least 0.125 pt at 100% black.
Lulu: Not stated.
Pictures
-
KDP: 300 DPI minimum; 600 maximum recommended.
IngramSpark: 300 ppi; 600 ppi for 1-bit black and white line art.
Lulu: 300 to 600 PPI.
-
KDP: Embed all images; flatten transparent objects and layers.
IngramSpark: Spot colours with transparency can print unexpectedly.
Lulu: Flatten transparent layers and vector objects.
Colour
-
KDP: Grey fills at least 10% on black-ink books.
IngramSpark: Convert all images to greyscale.
Lulu: Greyscale images, gamma 2.2 to 2.4; tints under 20% are hard to control.
-
KDP: Its cover page asks for CMYK images; no single interior rule is stated.
IngramSpark: Colour interiors and covers: CMYK.
Lulu: RGB (sRGB) or CMYK both print well; do not mix.
-
KDP: Convert spot colours; avoid mixing colour spaces.
IngramSpark: No spot colours or ICC profiles; on black text they can print grey.
Lulu: Uses sRGB or Coated GRACoL 2006 profiles.
-
KDP: Not stated.
IngramSpark: Total ink at most 240%; rich black 60C 40M 40Y 100K; never Registration black.
Lulu: Total ink at most 270%.
The PDF file
-
KDP: PDF/X-1a preferred, not required.
IngramSpark: PDF/X-1a:2001 recommended; colour books must be PDF/X-1a or PDF/X-3.
Lulu: Use Lulu's Acrobat Job Options; no PDF/X version named.
-
KDP: Do not lock or encrypt.
IngramSpark: Not stated; send an open file.
Lulu: No security or password protection.
-
KDP: 650 MB maximum.
IngramSpark: Web upload up to 1.5 GB.
Lulu: Not stated.
-
KDP: 24 to 828 for black ink on white (72 minimum for standard colour); rounded up to even.
IngramSpark: Divisible by two; extra pages added if needed.
Lulu: Paperback at least 32 pages; hardcover at least 24.
-
KDP: No more than 4 blank pages in a row at the start or middle; up to 10 at the end.
IngramSpark: The last page must be blank for its printing details; it adds one if not.
Lulu: Include any blank pages you want in the file.
Cover
-
KDP: Single PDF with back, spine and front.
IngramSpark: Separate from the interior; build it on the cover template.
Lulu: Single-page spread PDF; template provided after the interior is uploaded.
-
KDP: Spine = pages x 0.002252 in (white) or x 0.0025 in (cream).
IngramSpark: Use the Cover Template Generator for your exact page count.
Lulu: Spine = pages / 444 + 0.06 in (paperback).
-
KDP: Spine text from 79 pages; 0.0625 in clearance each side.
IngramSpark: Follow the template's spine area.
Lulu: No spine text at 80 pages or fewer.
-
KDP: 0.125 in bleed all round.
IngramSpark: 0.125 in bleed all sides (0.625 in wrap on case laminate); text 0.25 in from trim.
Lulu: 0.125 in bleed; 0.5 in safety margin.
Before you press publish
-
KDP: Book details must match the files.
IngramSpark: Revisions must be the entire file, never single pages.
Lulu: Upload the interior first, then build the cover on the template it gives you.
-
KDP: Order a proof copy from the Bookshelf.
IngramSpark: eProof or printed proof before release.
Lulu: Lulu strongly recommends one printed copy before selling.
Sources: KDP print-ready PDF, trim, bleed and margins, submission guidelines and cover help pages; IngramSpark File Creation Guide (version 8.24.26), interior and cover file creation articles; Lulu Book Creation Guide (January 2026) and PDF settings. Checked 19 November 2026.
Skip most of this list
Inkfluence AI exports a KDP paperback interior at your trim size with the gutter sized for your page count and every font embedded, plus a full-wrap cover sized to the same page count. Write a new book or import your manuscript.
KDP vs IngramSpark vs Lulu at a glance
The rules that differ most between the three, as published on 19 November 2026. Where a printer says nothing, the table says so rather than guessing.
| Rule | Amazon KDP | IngramSpark | Lulu |
|---|---|---|---|
| Bleed sides | Top, bottom, outside | Top, bottom, outside (not bind edge) | All four sides |
| 6 x 9 page size with bleed | 6.125 x 9.25 in | 6.125 x 9.25 in | 6.25 x 9.25 in |
| Inside margin, 300-page book | 0.5 in minimum | 0.5 in recommended | 1 in recommended total |
| Outside margin | 0.25 in (0.375 with bleed) | 0.5 in recommended | 0.5 in safety |
| Fonts | Embedded or subset | All embedded, interior and cover | Embedded or outlined |
| Image resolution | 300 dpi (600 max advised) | 300 ppi; 600 for line art | 300 to 600 ppi |
| Colour space | CMYK for cover images | Greyscale (B&W) or CMYK; no ICC | sRGB or CMYK |
| Ink limit | Not stated | 240% | 270% |
| PDF standard | PDF/X-1a preferred | PDF/X-1a:2001 recommended | Lulu Job Options |
| Max file size | 650 MB | 1.5 GB upload | Not stated |
| Minimum pages (paperback) | 24 (72 standard colour) | See trim list | 32 |
| Blank pages | 4 in a row max, 10 at end | Last page blank | Any you include |
| Checks your file? | Automatic review and Previewer | "Not preflighted prior to processing" | Automatic checks; repairs some issues |
If you print with more than one service, the safe approach is to meet the strictest version of each rule: IngramSpark's colour rules, Lulu's wider inside margin, and the bleed size of whichever printer the file is for. The IngramSpark vs KDP guide covers when using both makes sense.
Trim size, page size and bleed
Trim size is the size of the finished book, such as 6 x 9 inches or 5.5 x 8.5 inches. Choose it before you lay anything out, because every margin, line break and page count depends on it. KDP offers 16 standard trims on Amazon.com plus custom sizes from 4 to 8.5 inches wide and 6 to 11.69 inches tall; IngramSpark and Lulu have their own lists, and most common sizes appear on all three. Our guide to KDP trim sizes suggests a size by genre.
Page size is the size of each page in your PDF, and it must match the trim exactly, or the trim plus bleed. This is the single most common mismatch: a Word document left on US Letter or A4 and saved as PDF. The PDF font checker shows a file's page size alongside its fonts, which makes a quick second check.
Bleed is the extra strip of picture beyond the trim that gets cut off, so that edge-to-edge art has no thin white line after trimming. You only need it if something on a page touches the edge: a full-page photo, a coloured background, a picture-book spread. A text-only novel does not. Here the three printers differ in a way that catches people out:
- KDP adds 0.125 inch to the top, bottom and outside edge: the page is 0.125 inch wider and 0.25 inch taller than the trim. A 6 x 9 book with bleed is 6.125 x 9.25 inches. If even one page needs bleed, the whole file is set up with bleed (KDP trim, bleed and margins).
- IngramSpark does the same, and is explicit that there is no bleed on the bind edge, because it would shift your pages. 6 x 9 becomes 6.125 x 9.25 (File Creation Guide bleed chart).
- Lulu prints every file with 0.125 inch of bleed on all four sides: a 6 x 9 bleed file is 6.25 x 9.25 inches. If your book has nothing that reaches the edge, Lulu says you can send the file at the trim size and its system adds the bleed (Lulu Book Creation Guide).
So a bleed book needs a different interior file for Lulu than for KDP and IngramSpark. The KDP paperback template works out the exact KDP page size for every trim, with and without bleed, and our guide to picture-book bleed for illustrators shows how to set the art up.
Margins and the gutter
The gutter is the inside margin, the one next to the spine. A paperback is glued at the spine, so part of every page disappears into the fold, and the thicker the book, the more disappears. That is why every printer ties the inside margin to the page count, and why a margin that looks generous on screen can leave words curling into the binding on paper.
KDP publishes hard minimums, and its upload check enforces them:
| Page count | KDP minimum inside | Lulu recommended total inside |
|---|---|---|
| Under 61 | 0.375 in (from 24 pages) | 0.5 in |
| 61 to 150 | 0.375 in | 0.625 in |
| 151 to 300 | 0.5 in | 1 in |
| 301 to 400 | 0.625 in | 1 in |
| 401 to 500 | 0.625 in | 1.125 in |
| 501 to 600 | 0.75 in | 1.125 in |
| 601 to 700 | 0.75 in | 1.25 in |
| 701 to 828 | 0.875 in | 1.25 in |
KDP's outside, top and bottom margins must be at least 0.25 inch without bleed and 0.375 inch with bleed, and KDP asks you to type the same value into the inside margin and gutter fields if your program has both (source). In Word, the Gutter box adds to the Inside margin when mirror margins are on, so either keep Gutter at zero or count the two together.
IngramSpark does not publish a page-count table. It recommends at least 0.5 inch on every side of the text block and warns that printing can vary by 1/16 inch, so text too close to an edge can be cut. Lulu's guide recommends a 0.5 inch safety margin on all sides, adds the gutter on the spine side only, and suggests the larger totals in the table above (Lulu Book Creation Guide; its file specification also lists a 0.2 inch minimum gutter).
The practical rule: KDP's numbers are the floor, not the target. Most well-made paperbacks use more, and Lulu's recommended totals are a good guide to comfortable reading on a thick book. For the exact KDP numbers for your trim and page count, plus ready-to-type Word settings, use the KDP paperback template. And remember that everything printed in the margin area, including page numbers, running heads and picture captions, has to sit inside the margins too.
Fonts
All three printers require every font to be embedded, meaning the PDF carries the font itself rather than just its name. KDP accepts "Embedded" or "Embedded Subset" and recommends full embedding (KDP fonts); IngramSpark rejects files with unembedded fonts, in the interior and on the cover, and warns that Acrobat's default "Standard" setting leaves out the 14 base fonts; Lulu accepts fonts embedded or converted to outlines and warns that you may not have the printing rights for every font (Lulu fonts).
Two quick checks cover it. First, drop the interior and the cover into the free PDF font checker, which lists every font, says whether it is embedded, subset, Type 3 or missing, and gives a verdict for each printer without uploading your file. Second, if anything is flagged, the fonts not embedded guide has the fix for Word, Google Docs, Canva, Pages, InDesign, Affinity, LaTeX and a finished PDF.
Watch for Type 3 fonts, which most often come from PDFs printed by a web browser. None of the three printers publishes a rule about them and KDP passes them in practice, but some print stores' checkers flag them as "not embedded", so they matter if the same file is going anywhere stricter. While you are here, check text size too: KDP's minimum is 7 point, which can catch tiny copyright-page or footnote text (KDP guidelines), and IngramSpark asks that colour books print text of 24 point or less in 100% black only.
Already have a manuscript in Word?
Import it into Inkfluence AI, choose your trim size, and export a KDP interior with embedded TrueType fonts and margins sized for its page count. No export settings to hunt for.
Pictures: resolution, embedding and flattening
Every picture needs at least 300 dots per inch at the size it prints. That is the number all three printers agree on: KDP sets 300 dpi as the minimum and recommends no more than 600 to keep files a sensible size (KDP guidelines); IngramSpark asks for 300 ppi for photos and greyscale pictures and 600 ppi for one-bit black-and-white line art; Lulu asks for 300 to 600.
Resolution only means something at a printed size. A picture 1,800 pixels wide is 300 dpi when printed 6 inches wide, and only 150 dpi when stretched across a 12-inch spread. To work out the pixels a picture needs, multiply each printed inch by 300, or let the KDP image size calculator do it for every trim, with and without bleed. Raising the dpi number in an image editor without adding real pixels does not help: the printer sees the same blur.
Two more picture rules sit on the same lists. Pictures must be embedded, not linked to files on your computer, which matters most in InDesign and Affinity. And transparency and layers must be flattened: KDP asks for transparent objects and layers to be flattened in the native file, Lulu asks for transparent layers and vector objects to be flattened, and IngramSpark warns that spot colours combined with transparency can print unexpectedly or disappear. A PDF/X-1a export flattens transparency automatically, which is one reason printers like it.
For picture books, colouring books and anything with full-page art, resolution is where most problems hide, because art made for screens is usually far too small for print. Inkfluence AI paints picture-book and ABC-book pages at print resolution, about 300 dpi on a KDP paperback, for this reason; our picture book print resolution test measures the same book at 117 and 307 dpi, and the picture book walkthrough shows the whole process.
Colour: RGB, CMYK, greyscale and ink limits
Colour is where the three printers disagree most, so it is worth knowing exactly what each one says rather than following a general rule.
Black-and-white books
Make every picture greyscale before you export. IngramSpark asks for all images in a black-and-white interior to be converted to greyscale and for no spot colours or ICC profiles: its guide explains that an ICC profile applied to 100% black text often turns it into a shade of grey, so your text prints slightly washed out (File Creation Guide). Lulu asks for greyscale pictures with a gamma between 2.2 and 2.4, and notes that very light tints, 20% or less, are hard to control. KDP recommends grey fills of at least 10% on black-ink books so they do not vanish (KDP print-ready PDF).
Colour books
- IngramSpark asks for CMYK images in colour interiors and covers, a total ink coverage of no more than 240%, rich black built as 60% cyan, 40% magenta, 40% yellow and 100% black, never "Registration" black, and every spot (Pantone) colour converted to CMYK. Its interior file help repeats the 240% limit and the PDF/X-1a recommendation.
- Lulu says modern printing workflows have removed the need to convert RGB to CMYK, and that either prints well for most projects. If you work in RGB, use sRGB; if you have already converted to CMYK, stay in CMYK. Its ink limit is 270% total, and solid black should be 100% black with nothing added.
- KDP does not publish an interior colour space rule on its print-ready page. Its cover help says images should be in CMYK, spot colours converted, and colour spaces not mixed in one file.
If one file has to suit every printer, aim at IngramSpark's rules, which are the strictest: greyscale for black-and-white books, CMYK under 240% for colour, no ICC profiles on black text. Most authors writing text-led books never need to think about this beyond "make the pictures greyscale".
The PDF file itself
PDF standard: what PDF/X-1a means and who wants it
PDF/X-1a is a version of PDF made for printing. A file that meets it has every font embedded, no transparency, and colours in print terms rather than screen terms, so it ticks several items on this list in one go. KDP says PDF/X-1a is "preferred" but not required (KDP). IngramSpark recommends PDF/X-1a:2001, and for colour interiors its File Creation Guide says files must be PDF/X-1a:2001 or PDF/X-3:2002. Lulu does not name a standard; it offers its own Acrobat settings files ("Job Options") to export with (Lulu PDF settings).
InDesign, Affinity Publisher and Acrobat Pro can export PDF/X-1a directly. Word, Google Docs, Pages and Canva cannot, so if you use them, check the underlying rules (fonts, flattening, colour) yourself, or convert the finished file with Acrobat Pro's Preflight. KDP accepts files that are not PDF/X, since its preference is not a requirement.
Single pages, no marks, no password
All three want one PDF of single pages in reading order, not two-page spreads, with no crop marks, registration marks or printer's marks; IngramSpark warns that marks in the file "could show up in printed copies". KDP also asks for no comments, bookmarks, annotations or leftover template text, and for all pages to face the same way. Do not password-protect or encrypt the file: KDP and Lulu say so directly.
Page count and blank pages
KDP paperbacks run from 24 pages (72 for standard colour) to 828 for black ink on white paper, with lower maximums on some trims and papers, and KDP rounds the count up to an even number. It allows no more than 4 blank pages in a row at the start or in the middle of a book, and up to 10 at the end (KDP). IngramSpark stores every interior with an even page count and uses the last page, which must be blank, for its printing details; if your last page is not blank it adds one. Lulu paperbacks need at least 32 pages and its file should include every blank page you want, such as the blank backs of chapter openers.
Remember that page count drives the gutter and the cover, so finish editing before you size either.
File size
KDP's limit is 650 MB for interiors and covers, with covers ideally 40 MB or less. IngramSpark accepts web uploads up to 1.5 GB. Lulu does not publish a limit. A text book is a few megabytes; only picture-heavy books get near these, usually because of images far above 600 dpi.
From idea to KDP paperback, in one place
Write with Inkfluence AI, pick a trim size, and download one zip with the paperback interior, the full-wrap cover, the Kindle files and a READ ME that says which file goes in which KDP box.
The cover: separate, one piece, sized to the page count
The paperback cover is its own PDF: back cover, spine and front cover side by side as one wide page, with 0.125 inch of bleed all the way round. All three printers ask for it as a separate upload from the interior (KDP cover, IngramSpark cover file creation, Lulu guide).
The spine is the part that goes wrong, because its width comes from the page count and paper, and each printer calculates it differently:
- KDP: page count times 0.002252 inch for white paper, 0.0025 inch for cream, 0.002347 inch for premium colour. The full cover is bleed + back + spine + front + bleed wide, and trim height plus two bleeds tall. Our KDP spine width calculator does the sums.
- IngramSpark: build the cover on the template from its Cover Template Generator for your exact trim, paper, binding and page count; it does not publish a per-page figure. The IngramSpark cover calculator gives the sizes for planning.
- Lulu: page count divided by 444, plus 0.06 inch, for paperbacks; hardcovers use a table. Lulu gives you a template with the exact spine after you upload the interior.
Spine text needs a thick enough book: KDP prints it only from 79 pages and asks for 0.0625 inch of space either side; Lulu advises no spine text at 80 pages or fewer, because a slight shift would push it onto the front or back. Keep cover text away from the trim: IngramSpark asks for 0.25 inch, Lulu for 0.5 inch. Leave room for the barcode: KDP adds one if you do not, IngramSpark's template marks its place, and Lulu only needs one for retail distribution.
The order matters: finish the interior first, then size the cover from its final page count. A cover made before the last round of edits is the most common cause of a cover rejection on a book whose interior passed.
One book, three printers: a worked example
Take a 300-page novel, 6 x 9 inches, black ink on cream paper, text only, so no bleed. Here is what each printer asks for, using the rules above.
| KDP | IngramSpark | Lulu | |
|---|---|---|---|
| Interior page size | 6 x 9 in | 6 x 9 in | 6 x 9 in (Lulu adds bleed) or 6.25 x 9.25 in |
| Inside margin | 0.5 in minimum (151 to 300 pages) | 0.5 in recommended | 1 in recommended total |
| Other margins | 0.25 in minimum | 0.5 in recommended | 0.5 in safety |
| Spine width | 300 x 0.0025 = 0.75 in | From the cover template | 300 / 444 + 0.06 = about 0.736 in |
| Cover size | 0.125 + 6 + 0.75 + 6 + 0.125 = 13 in wide, 9.25 in tall | From the cover template | From the template Lulu supplies |
For this book one interior file can serve all three: set it at 6 x 9 inches with a 1-inch inside margin and at least 0.5 inch on the other three sides, which meets every printer's number, embed the fonts, and keep the last page blank for IngramSpark. The covers cannot be shared: the KDP and Lulu spines differ by about 0.014 inch, and IngramSpark's comes from its own template, so make one cover per printer from the same artwork.
Change one thing, add a full-page map that bleeds, and the answer changes: KDP and IngramSpark want a 6.125 x 9.25 inch file, Lulu a 6.25 x 9.25 inch one, so you need two interiors. That is the most useful single fact on this page for authors who publish wide.
To price the same book on each service, the KDP printing cost calculator and the IngramSpark cost calculator work from the same trim and page count, and the book length calculator estimates the page count from your word count before the book is laid out.
The common rejections, and the fix for each
These are the problems printers name most often in their own guidance (KDP lists "excessive blank pages" among them; IngramSpark's common file issues page leads with bleed, safety area and spine errors). Each links to the tool or guide that fixes it.
Fonts not embedded
Export again with a print setting and swap fonts whose licence blocks embedding. Full guide: fonts not embedded. Open the fix
Page size does not match trim size
Set the page size to the trim (no bleed) or trim plus bleed, and pick the matching bleed option in the setup. Open the fix
Content outside the margins or too close to the edge
Widen the inside margin for your page count and move page numbers and headers inside the margins. Open the fix
Image resolution too low
Replace pictures with versions that have 300 pixels per printed inch. Open the fix
Cover does not fit the spine
Recalculate the cover from the final page count and paper after the interior is finished. Open the fix
Too many blank pages
Remove runs of empty pages; KDP allows 4 in a row inside the book and 10 at the end. See the rule
Bleed missing or white edge after trimming
Extend edge-to-edge art the full 0.125 in past the trim on the right sides for that printer. Open the fix
KDP's rejection emails each have their own wording and fix; our guide to KDP rejecting a book goes through them one by one.
How Inkfluence AI makes the KDP file for you
Most of this checklist is the same every time, which is why we built it into the export. When you export a book for KDP from Inkfluence AI, you get one zip, built to the book's real page count:
- The paperback interior at your trim size, with the inside margin sized from the page count. Books with full-page photos, and every picture book and ABC book, are made with bleed; the READ ME says which bleed option to pick.
- Every font embedded as TrueType, so the file passes font checks at KDP and at stricter printers alike.
- Picture pages at print resolution, about 300 dpi on a KDP paperback for picture books and ABC books.
- The full-wrap cover as one PDF with 0.125 inch bleed and the spine sized from the same page count and the paper you choose; spine text appears from 79 pages, as KDP requires.
- A READ ME with the trim size, page count, spine width and paper to select, and your print cost and royalty.
Bring your own manuscript (our import walkthrough covers Word, PDF and EPUB) or write the book here. The print-ready PDF with AI guide walks through the export step by step, and the AI book formatter page shows what the interior looks like. The export is built for KDP's rules; if you also publish through IngramSpark, run through the colour and PDF standard items above as well.
Export your KDP paperback today
Interior, cover and READ ME in one download, with the fonts, margins and spine already right for your page count.
Print-ready PDF: FAQ
What makes a PDF "print-ready"?+
Can I use the same PDF for KDP, IngramSpark and Lulu?+
Do I need bleed in my book?+
What resolution should images be for KDP and IngramSpark?+
Should my print PDF be RGB or CMYK?+
Is PDF/X-1a required?+
How wide should the gutter be?+
Why was my cover rejected when the interior was accepted?+
Does IngramSpark check my file before printing?+
Can Inkfluence AI make a print-ready PDF?+
Related tools and guides
Fonts not embedded
The font error explained and fixed in every tool.
Free PDF font checker
Every font in your PDF and a verdict per printer.
KDP paperback template
Page size and margins for your trim and page count.
KDP spine width calculator
Spine and full-wrap cover size.
IngramSpark cover calculator
Cover, spine and bleed for IngramSpark.
KDP image size calculator
Pixels needed at 300 dpi for any print size.
Picture book print resolution
Will AI pictures print sharp? Our 117 vs 307 dpi test.
Create a print-ready PDF with AI
From manuscript to KDP paperback file.
KDP trim sizes
Which trim size suits your genre.
KDP rejected my book
What each rejection email means.
IngramSpark vs KDP
Which printer, and how to use both.
KDP printing cost calculator
What each copy costs to print.
Paperback publishing on KDP
The whole KDP print guide.
Tick the list once, not every time
Write or import your book, pick a trim size, and export a KDP paperback with embedded fonts, the right gutter and a cover sized to your page count.