Free tool · Runs in your browser · Your PDF is never uploaded

Free PDF font checker: are your fonts embedded for KDP, IngramSpark and Lulu?

"Fonts not embedded" is one of the most common reasons a print-on-demand service refuses a book interior, and it usually arrives after you thought the book was finished. Drop your PDF below and the checker lists every font inside it, tells you whether each one is embedded, embedded as a subset, missing, or stored as a Type 3 font, and says whether Amazon KDP, IngramSpark and Lulu should accept the file. Below the checker is a plain-English guide to what each result means and how to fix it in Word, Google Docs, Canva and the other tools authors use.

Written by Sam May, Founder of Inkfluence AI | | Printer rules checked 19 November 2026
An author's desk with a laptop showing a font check with three green ticks, and an open printed proof copy of a paperback

Amazon, Kindle and KDP are trademarks of Amazon.com, Inc. or its affiliates. IngramSpark and Lulu are trademarks of their owners. Inkfluence AI is an independent tool and is not affiliated with or endorsed by any of them.

How do you check if fonts are embedded in a PDF?

Open the PDF's font list and look at each font's status. In the checker below, drop the file in and read the table. In Adobe Acrobat, open File, Properties, Fonts: every font should say "Embedded" or "Embedded Subset". A font with neither is missing from the file and KDP, IngramSpark and Lulu will all refuse it. A font listed as Type 3 is embedded but stored as drawings, which KDP accepts and some stricter print checkers do not. The fix is almost always to export the PDF again from your writing program with fonts embedded, using a PDF/A or print preset.

Check the fonts in your PDF

Choose your book interior (or a cover PDF). The file is read on your computer by a PDF library served from this site; nothing is uploaded. A 300-page novel takes a few seconds; a large picture book can take longer.

What each font status means

A PDF can carry a font in four ways, and printers treat them differently. Your checker result uses these four labels.

Embedded

The whole font file is inside the PDF. Every printer accepts this, and it is what KDP recommends.

Embedded subset

Only the letters your book uses are inside the PDF, which keeps the file small. KDP, IngramSpark and Lulu accept subsets; a name such as ABCDEF+Garamond is how you spot one.

Type 3

The font is inside the PDF, but stored as a set of drawings rather than a real font. KDP accepts it. Some print checkers do not, and report the file as having fonts that are not embedded.

Not embedded

The PDF only names the font and expects the printer to have it. Every major print-on-demand service rejects this, because a missing font prints in a substitute or not at all.

A brass printer's loupe magnifying a crisp printed letter g on a book page
An embedded font is what keeps every letter as sharp on paper as it looked on your screen.

What KDP, IngramSpark and Lulu ask for

Every print-on-demand service asks for embedded fonts, because their presses do not have your fonts installed. None of the three big services publishes a rule about Type 3 fonts, so the Type 3 column is what happens in practice. Rules read from each service's own pages on 19 November 2026.

ServiceFont ruleType 3 fontsSource
Amazon KDP Every font must show as "Embedded" or "Embedded Subset". KDP recommends embedding fonts fully. Accepted in practice KDP Paperback Fonts
IngramSpark All fonts must be embedded; files without embedded fonts are not accepted. Prefers PDF/X-1a. No published rule; convert to be safe IngramSpark file requirements
Lulu Any font you like, as long as it is embedded. Some screen-only fonts cannot be embedded. No published rule; convert to be safe Lulu help centre
Direct-to-reader print stores Their own automatic checks, usually stricter than KDP. Can be refused as "fonts not embedded" Varies by store

Two details from those pages are worth knowing. KDP's Print Ready PDF guidance recommends embedding fonts fully rather than as subsets, while its fonts page accepts "Embedded Subset", so subsets pass but full embedding is the safer habit. And IngramSpark notes that Acrobat's default "Standard" setting does not embed the 14 basic PDF fonts (Times, Helvetica, Courier and their variants), which is a classic cause of a rejection on a file that looked fine; its help centre recommends exporting as PDF/X-1a:2001 instead.

A phone showing an email that a file could not be processed, next to a printed sheet with 'Fonts not embedded' circled in red
The message usually arrives after upload. Checking first saves a round trip.

Skip the font problems entirely

Inkfluence AI writes, formats and exports your book as a print-ready PDF with every font embedded as a real TrueType font, at the trim size and bleed KDP asks for. Bring your own manuscript or start from an idea.

Create a print-ready book

Why Type 3 fonts end up in book PDFs

A Type 3 font is the oldest and most flexible kind of PDF font: each letter is stored as a small drawing. That makes it a convenient fallback for a program that cannot embed a font the normal way, and three situations account for most of the Type 3 fonts in self-published books.

  • PDFs made in a browser from web fonts. Many online writing and design tools build your book as a web page and let the browser print it. The fonts on that page usually come from a font service as variable fonts (one file covering every weight), and Chrome's PDF engine cannot embed a variable font directly, so it writes a Type 3 font instead (a Chromium developer explains why). Fonts installed on your computer as ordinary single-weight files come out as normal TrueType fonts.
  • LaTeX with bitmap fonts. Older TeX setups use bitmap versions of Computer Modern, which arrive in the PDF as Type 3. The lmodern or cm-super packages fix it.
  • Old or unusual PDF tools. Some converters and virtual printers fall back to Type 3 for any font they cannot read, especially decorative or icon fonts.

We found the first of these in our own print files in November 2026, when a print store refused an author's KDP-ready interior as "fonts not embedded" even though every font was technically inside it. The fix was to give the print step ordinary single-weight copies of the same fonts. Every line, word and page stayed exactly where it was, and the Type 3 fonts disappeared. If your book came out of a browser-based tool, run it through the checker before you upload it anywhere other than KDP.

How to fix "fonts not embedded" in the tools authors use

The reliable fix is to export the PDF again from the program you wrote or designed the book in, with the setting that embeds fonts. Patching a finished PDF works less often, because a program can only embed a font that is installed on your computer and licensed for embedding. For step-by-step fixes, Acrobat and Ghostscript repairs, and font licences in depth, read our guide to fonts not embedded in a PDF.

Microsoft Word

Save as PDF rather than printing to PDF. On Windows, open Options in the Save As dialog and tick "ISO 19005-1 compliant (PDF/A)", which forces every font to be embedded. On a Mac, choose "Best for printing". Word does not embed fonts in the .docx itself unless you tick "Embed fonts in the file" under File, Options, Save.

Google Docs

File, Download, PDF Document usually embeds every font. If the checker shows a font as not embedded, it is often one added from outside the Google font list; switch that text to a font from the Docs menu and download again.

Canva

Download as "PDF Print", not "PDF Standard". Leave "Flatten PDF" off unless you have to: flattening turns your text into pictures, so nothing is left to embed, but the text also stops being searchable and can print slightly softer.

Browsers (Chrome, Edge, Brave)

Print to PDF embeds fonts, but web fonts loaded from a font service often come out as Type 3. Use fonts installed on your computer instead, or export from the program you wrote the book in.

Adobe Acrobat Pro

Open Print Production, then Preflight, and run the fix-up that embeds missing fonts, or convert the file to PDF/X-1a, which IngramSpark prefers. Acrobat can only embed a font that is installed on your computer and licensed for embedding.

InDesign, Affinity Publisher, Vellum, Atticus

Export using a print preset (PDF/X-1a or PDF/X-4 in InDesign and Affinity). These programs embed fonts by default; when they do not, the font licence usually forbids it, and the fix is to use a different font.

LaTeX

Old bitmap fonts come out as Type 3. Load the lmodern or cm-super package (or any outline font) and rebuild.

When a single font refuses to embed whatever you do, its licence is the likely reason. Some fonts, especially free ones from font sites and some subscription fonts, forbid embedding in a commercial PDF. KDP says the same on its fonts page: a font that does not allow commercial use cannot be embedded or printed. Swap it for a font with an open licence, such as any font from the Google Fonts library, and export again.

Already have a manuscript?

Import your Word file into Inkfluence and export a KDP-ready interior with embedded fonts, a contents page and the margins your trim size needs.

Import my manuscript

Fonts are one check: the rest of a print-ready PDF

Embedded fonts are the most common font problem, but a print service checks several other things in the same pass. Before you upload, make sure of these as well, or work through the full print-ready PDF checklist with every KDP, IngramSpark and Lulu rule side by side.

  • Page size matches your trim size exactly, plus 0.125 inches on the outside and top and bottom if any picture runs to the edge (bleed). The checker shows your page size so you can compare it with what you chose in KDP.
  • Pictures are 300 dpi at their printed size. The KDP image size calculator gives the pixels each size needs.
  • Margins are wide enough for your page count, with a bigger inside margin (gutter) on thicker books. The KDP paperback template has them for each trim size.
  • The cover is sized for the final page count. The spine grows with every page; the spine width calculator works it out for KDP, and the IngramSpark cover calculator for IngramSpark.
  • No blank pages you did not mean to have. A print service may refuse a run of empty pages, or ask whether they are deliberate.
A woman lifting a freshly printed paperback proof copy out of a shipping box with two more proofs inside
The best check of all is a printed proof copy. Fonts that pass the checker look the same on paper as on screen.

Write it, format it, print it

From a one-line idea to a print-ready interior and cover in an afternoon: chapters written with you, formatted for your trim size, exported with embedded fonts for KDP, IngramSpark and Lulu.

Questions about embedded fonts

How do I check if fonts are embedded in a PDF?

Drop the PDF into the checker on this page. It lists every font, says whether it is embedded, embedded as a subset, not embedded or embedded as Type 3, and gives a verdict for KDP, IngramSpark and Lulu. In Adobe Acrobat you can also open File, Properties, Fonts: each font should say "Embedded" or "Embedded Subset".

Is my PDF uploaded anywhere?

No. The checker reads the file inside your browser using a PDF library served from this site. Nothing is sent to a server, so it is safe for an unpublished manuscript.

What does "fonts not embedded" mean?

The PDF names a font but does not contain it, so the printer would have to supply the font itself. Print-on-demand services cannot guarantee that, so they reject the file. The same error is sometimes shown for Type 3 fonts by stricter checkers.

What is a Type 3 font?

A font stored in the PDF as a set of small drawings rather than a real font file. It is embedded, and it prints, but some print checkers treat it as unembedded. Browsers often produce Type 3 when a page uses web fonts, because they cannot embed variable fonts directly.

Does KDP accept Type 3 fonts?

KDP asks for every font to show as "Embedded" or "Embedded Subset", and PDFs with Type 3 fonts go through KDP in practice. KDP does recommend full embedding, so a TrueType or OpenType font is the safer choice.

Does IngramSpark accept Type 3 fonts?

IngramSpark publishes a rule that all fonts must be embedded and prefers PDF/X-1a, but it does not publish a rule about Type 3. If your file has Type 3 fonts, converting them before you upload saves a possible rejection.

Is an embedded subset good enough?

Yes for KDP, IngramSpark and Lulu. A subset carries only the characters your book uses. KDP's Print Ready PDF page recommends full embedding, but its fonts page accepts "Embedded Subset", and subsets are what most programs produce.

My PDF has no fonts at all. Is that a problem?

Not for printing. It means the text is stored as pictures or outlines, for example after Canva's "Flatten PDF" or a scan. The text will print, but it is not searchable, and small text can look softer than real type.

Can I embed fonts in a PDF that is already made?

Sometimes. Acrobat Pro's Preflight can embed a missing font if that font is installed on your computer and its licence allows embedding. It cannot turn a Type 3 font back into a real font. Re-exporting from the original file with the right settings is the reliable fix.

Do Inkfluence print files pass?

Yes. Inkfluence's PDF and KDP print files embed every font as a TrueType font, so they pass KDP, IngramSpark and Lulu font checks. You can drop one into the checker to see for yourself.

More free tools for print books

Your next book, print-ready from the start

Every Inkfluence print file embeds its fonts, matches your trim size and passes KDP's checks, so the only thing left to do is order your proof.

Create my book